China to buy cruise ships as pandemic hits

China is expected to buy three cruise ships and one cruise ship passenger vessel, as the coronavirus crisis intensifies, state media said Tuesday.

China has already ordered 14 cruise ships for its coastal cities of Shenzhen and Tianjin, Xinhua reported, citing a source with direct knowledge of the matter.

The source said the ships would be used by the Chinese government for humanitarian aid, with Chinese ships also using them for military and law enforcement purposes.

The news comes as a U.S. Navy carrier strike group headed to the Gulf to conduct drills with Saudi Arabian naval forces in the first major U.A.E. deployment since the coronovirus crisis began.

China will also begin shipping cruise ships to foreign ports, the Xinhua report said.

The first cruise ships were ordered by the Guangdong Maritime Administration in April and will be delivered by the end of June, the source said.

The government has yet to announce a price for the ships, which the government has said would be about $2 billion.

The announcement is likely to be made at the United Nations General Assembly in New York on Sept. 26, Xinhan reported.

New Zealand to host ‘westerman cruise ship’ on first visit to Australia

New Zealand is set to host a new type of cruise ship to its shores, a 1,200-metre vessel called the Westerman.

The ship will travel to New Zealand’s northern islands of Christchurch and Otago and then sail to the Australian mainland in two months.

It will join two other ships currently in port at Nelson, on the south-east coast of New Zealand, and is expected to arrive in the Australian port of Darwin by November.

The Westerman will be the first ship to make the long journey between New Zealand and the mainland.

It will take about eight weeks to complete its journey from Christchurch to Christchurch, and the ship will then travel north through Otago to Darwin, before making its way across the Tasman Sea to Perth.

Its construction is the first for the port of Nelson, and a major expansion in the port has been undertaken.

In 2014, Nelson had one of the fastest-growing populations in the world.

“The fact that this ship will make the journey from New Zealand via Otago, and then to Darwin on the northern part of the island of New Britain and then into Australia is just incredible,” said Nelson Mayor Michael Daley.

This is the third ship for Nelson Port, following the Westermans in 2011 and the Queen Elizabeth, a 350-metres cruise ship that was christened in 2015.

Nelson is the largest port in the country and it has been the home of the Nelson-based Port of Nelson for over 70 years.

A total of 15 vessels are registered to Nelson, with about a dozen currently in service, including two cruise ships.

Tourists can also get a glimpse of Nelson’s famous shipbuilding facilities in the town’s town hall, where the Westermann will be fitted with a specially-designed engine and sails.

New Zealand’s new shipbuilding sector has been boosted by the introduction of the National Shipbuilding Strategy, which will boost the country’s exports of passenger ships to Asia, Europe and North America.

Australian Prime Minister Malcolm Turnbull also announced on Tuesday that Australia will invest $4.4 billion in New Zealand shipbuilding and will support up to 2,000 new jobs over the next four years.

When a cruise ship’s stabilizers break, how to fix them

Cruise ships often come with stabilizers for the propellers, but the technology that makes them so valuable is not well understood.

It’s a technology that has been in the works for years, but is still in the early stages.

Here’s how the technology worksThe cruise ship is the heart of a cruise line’s operations, providing the bulk of the company’s revenue.

The cruise ship itself is a massive structure, about a kilometer long and about 3 kilometers wide.

The ship’s propellers are powered by a massive electrical generator that powers the ship’s motors.

These motors produce thrust by spinning an aluminum sphere that moves along a wheel.

The spinning wheel spins the sphere at a rate of about 60 kilometers per second, which can be used to propel the ship forward.

The steering and control system of the cruise ship relies on a system called the cruise stabilizer.

A stabilizer, also called a stabilizer system, is a device that keeps the ship stable by keeping it from toppling.

A cruise stabiliser is typically made of steel, with a thin sheet of aluminum covering the center of the sphere.

The stabilizer is a piece of metal with a plastic coating on it.

A plastic coating helps to keep the stabilizer from tipping over as it spins.

The fins of a ship’s propulsion system.

The fins of the propulsion system, or propellers.

The propellers of a boat’s propulsion systems, or the sails.

The main sails of a sailboat, or sails.

A propeller, or a propeller’s spinning wheel.

The main sails and the propeller are designed to move in different directions.

The primary sail is the ship that carries the passengers and crew.

The secondary sail is used to carry the cargo and other equipment.

A cruise ship has a rudder that is used by the ship to guide the ship.

The rudder moves the ship in all directions.

It moves at a certain speed, and it can turn to make a turn or pitch the ship as necessary.

The rudder is controlled by a control system called a rudle.

The control system is connected to the rudder, and the rudle can control the speed at which the ship is turning, and how far the ship can move.

The sail and the main sails are connected to a rudger.

A rudder can be made of several parts, and these parts are connected together.

A system called an actuator, or an arm, can move a part of the system that moves the rudger or the actuator.

When a part is moved, it pushes the actuators against each other, creating a movement of force.

The propeller and the sail are connected by a rotor.

A rotor moves the propelles against each another, creating force.

The rotor also moves against each of the sails, creating an airflow that moves them.

The air is sucked into the main sail, which is mounted on the sail.

The air is then forced out through the main rigging.

The flow of air creates the force that keeps each of these sails in place.

The sails are also made of aluminum.

The aluminum makes the sails stronger and more durable, so they are designed for a long life.

The sails are attached to the main deck by a loop.

The loop is the longest part of a sailing ship, and when it is broken, the ship starts to tip over.

It has a lot of strength.

The hull is made of a plastic covering.

The cover protects the sails from the elements.

The rigging is made up of ropes that are attached with hooks and strings.

The ropes are attached by hooks that are used to hold the sails in position.

The rigging is also attached to each sail, by hooks.

The ship’s engine is connected by an electric generator, or engine.

The engine is used in the ship, powering the propellor.

The engines power the sails and main sails.

The bow is made from a wooden shipboard.

The wooden bowboard is usually built of oak, or birch.

It is about 1 meter long.

The stern is made out of a piece called a keel.

The keel is the center piece of the ship and is about 6 meters long.

The deck of the keel houses the engines, sails, and rigging.

The watertight container is called a hull.

A hull is about 10 meters long and is attached to one of the sailboats.

It carries all the cargo that the ship carries.

The watertight hull holds everything the ship holds, including food, water, and fuel.

The crew is usually in the water.

A crew member stays on the hull to protect it from the water, which might include sharks.

The windscreens are made from aluminum.

They are designed with an integrated light system that produces a beam of light when the ship goes over the water and a beam when it hits the water in the distance.

The lights are controlled by an electronic controller.

The electronic controller